MG-30 MKII
2×
DSP HEADROOM
2× FIRST-GEN HARDWARE
12
MOVABLE
SIGNAL BLOCKS
10
IMAGE / NAM
USER SLOTS
32-bit
HIGH-RESOLUTION
ADC / DAC
Next-Generation Dual DSP Architecture for Stable, High-Load Performance
The MG-30 MKII is powered by a next-generation dual-DSP platform based on the NXP i.MX RT processing architecture, combining dual Arm Cortex-M7 and Cortex-M4 cores working in tandem. This architecture provides significantly more headroom for the Gen 2 firmware, ensuring fast response and rock-solid stability even in complex parallel routing, multi-block processing, or high-demand performance setups—so you can focus on playing without compromise.
Dual-DSP Architecture
Twice DSP Headroom
Gen 2 Firmware
Supports TS/AC-2K White Box Amp Modeling, NUX IMAGE Capture File, and NAM Loader
28 Guitar Amp Models
5 Bass Amp Models
2 Acoustic Amp Models
10 IMAGE/NAM Slots
Native NAM A2-Lite Support
Fully Reconfigurable 12-Block Signal Chain for True Pedalboard Flexibility
The MG-30 MKII features 12 fully assignable signal blocks—WAH, CMP, GATE, EFX, AMP, IR, EQ, S/R, MOD, DLY, RVB, and VOL—offering flexible routing and parallel signal chain configurations.Whether you’re building a traditional pedalboard-style setup or a complex wet/dry rig, the system gives you complete freedom to design your own signal flow for recording, songwriting, and live performance.
Redesigned Footswitch Logic for Faster Control
This redesigned footswitch logic provides intuitive and efficient control. In Preset Mode, footswitches A, B, and C select their corresponding Presets. Each Preset contains three Scenes, and pressing the active footswitch again cycles through them. Press A+B simultaneously to perform Bank Down, or B+C simultaneously to perform Bank Up.
Flexible Stomp Mode for Live Performance
The new Stomp Mode is designed for guitarists who prefer a traditional pedalboard workflow. Each Scene can be assigned up to three CTRL footswitches, allowing effects to be switched on or off directly during performance. Hold footswitch A to enter or exit Stomp Mode.
Studio-Grade Dynamic Range and Realistic Amp Response
Equipped with a 32-bit high-resolution ADC/DAC conversion system and support for up to 1024-point high-resolution third-party IR loading, the MG-30 MKII delivers enhanced realism, spatial depth, and dynamic response. From clean articulation to high-gain punch and ambient depth, every detail is reproduced with greater natural feel and a more authentic amp-in-the-room experience.
32-bit ADC/DAC
1024-point IR loading
Simultaneous NAM and IR Processing
One Device for Recording, Streaming, and Live Performance
A newly added 1/4″ TRS balanced output ensures stable connectivity with mixers, audio interfaces, and professional PA systems. The USB-C port supports recording, firmware updates, and NUX Audio editing, while AUX IN can be routed directly into the USB audio stream—making the MG-30 MKII a seamless solution for streaming, recording, and content creation workflows.
1/4" TRS balanced output
USB-C Recording
AUX IN to USB Stream
Large Display with Visual Editing for Faster Workflow
A 4-inch 800×400 high-resolution full-color LCD provides a clear, graphical view of your entire signal chain and parameter settings in real time. Paired with the QuickTone editor software, users can easily manage presets, edit parameters, and import IMAGE, NAM, and third-party IR files—delivering a smooth, intuitive workflow both on-device and in software.
4-inch Display
Quick Parameter Adjustment
NUX Audio Software
Key Features
Send/Return Effects Loop
Add external pedals, preamps, or amp gear into your signal chain
Expanded Foot Control Support
Expand to a 5-Footswitch Multi-Effects System with the NMP-2 Footswitch.
Built-in Expression Pedal
Control volume and effect parameters in real time.
1/4" TRS Balanced Stereo Output
Deliver a wider and more immersive soundstage.
NUX Audio Software Support
Edit presets and manage tones with ease. Native NAM A2-Lite support with simultaneous NAM and 3rd IR processing.
New White Finish Design
A fresh white finish with a modern visual identity.
Comparison
What’s New in MG-30 MKII ?
Feature
MG-30 MKII
MG-30
DSP Resources
200%
100%
Preset Switching
A + B + C, Bank Up & Bank Down
Up & Down
Stomp Mode
✅
–
Output
Balanced TRS
Unbalanced TS
AUX to USB Routing
✅
–
Expression Pedal
Redesigned
Original Design
Finish
Metallic White
Metallic Blue
Send / Return
✅
✅
Sample Rates / Bit Rates
48 kHz / 32-bit
48 kHz / 32-bit
Amp Models
35 x TS/AC-2K Amp Models, 10 User Slots for IMAGE and Native NAM A2 Profiles
35 x TS/AC-2K Amp Models, 10 User Slots for IMAGE and Native NAM A2 Profiles
IR
1024 Sample Points, Supports 24 slots for 3rd IRs
1024 Sample Points, Supports 24 slots for 3rd IRs
Display
4-inch Color Display
4-inch Color Display
EXP / FS
Includes NMP-2 LITE and supports up to 5 footswitches for enhanced live control
Includes NMP-2 LITE and supports up to 5 footswitches for enhanced live control
Module
12 Independent Signal Blocks with Flexible Routing
12 Independent Signal Blocks with Flexible Routing
In the Box
MG-30 MKII x 1
NMP-2 LITE Dual Footswitch x 1
Power Adapter x 1
Patch Cable x 1
USB Cable x 1
– Dual DSP architecture based on NXP i.MX RT processors, delivering twice the processing power of the first-generation hardware.
– NUX TS/AC-2K White-Box amp modeling with enhanced processing performance.
– Supports NUX IMAGE Profiles and NAM profile import, including direct import of Native NAM A2 Lite profiles, with 10 user slots.
– 1024-sample IR resolution with 24 third-party IR loader slots.
– Wide range of electric guitar amp models, bass amp models, and acoustic simulation IRs with matched amp models.
– Dedicated Stomp Mode for pedalboard-style operation, with up to three assignable CTRL footswitches for each Scene.
– New Preset and Scene switching modes, with direct footswitch control for fast and seamless changes.
– 12 independent, movable signal blocks (WAH, CMP, GATE, EFX, AMP, IR, EQ, S/R, MOD, DLY, RVB, VOL), with flexible routing and optional parallel post-effects.
– Send/Return loop interface for connecting external effects pedals, with freely reorderable placement within the signal chain.
– Supports external footswitch expansion into a 5-footswitch multi-effects processor, as well as expression pedal input with fully assignable parameter control.
– Balanced 1/4″ TRS outputs for improved compatibility in live and studio environments.
– AUX IN audio can be routed into the USB audio stream for simultaneous playback and recording.
– 32-bit high-resolution ADC and DAC for improved dynamic range and signal accuracy.
– USB audio interface for recording, firmware updates, and integration with NUX Audio Software.
– 4″ 800 × 400 color LCD with an intuitive graphical user interface.
– Input Impedance:
- Input: 1 MΩ
- Return: 220 kΩ
– Output Impedance:
- Output: 1 kΩ
- Send: 1 kΩ
– A/D Converter: 32-bit
– Sampling Frequency: 48 kHz
– Frequency Response: 20 Hz–20 kHz
– Dynamic Range: 110 dB
– Current Draw: <400 mA
– Power: 9 V DC, center negative
– Dimensions: 313 (L) × 166 (W) × 55 (H) mm
– Weight: 1.5 kg
